Since I installed my monitor last month, I have been working on the graphics for my interface, setting up emulators, tracking down screenshots, etc. I am still configuring the other emulators that I plan on using, but MAME is finished... and so is my interface design.
Without further ado:
Thursday, October 16, 2008
they came bearing gifts of new control panels...
On my way out the door to work this morning, I was met by my wife's uncle, Jeff, who has been working on a new metal control panel for me. He had stopped by to give me the first prototype. One thing that I noticed right away, it that this new aluminum panel weighs half as much as the steel original. After a quick test-fit, it looks like one of the bends needs to be bent in a bit more and the top and bottom rows of buttons need to be placed closer together. Other than that, it looks good. I will find out more tonight when I try to fit some controls in the panel.
I snapped a few quick photos of it this morning (bear with the quality as all I had time to use was my cell phone camera):
Hopefully after a few tweaks, I will have a shiny new panel to install!!
I snapped a few quick photos of it this morning (bear with the quality as all I had time to use was my cell phone camera):
Hopefully after a few tweaks, I will have a shiny new panel to install!!
Thursday, September 18, 2008
An update... *Now With Actual Progress!!*
After a busy summer, and a few missed deals on monitors, I am back with some progress. The other day, I was scouring Craigslist for deals on 20 or 21 inch CRT Monitors. I emailed a few of the sellers, and got a response from one guy, Rick, that said he still had his for sale. It was a 21" IBM monitor that wasn't too far away, and the best part... he was selling it for $10.00!! He said it was in excellent condition and the photos looked good as well, so I promptly contacted him and arranged to pick it up. Thanks for the great deal, Rick!!
After I got home with my shiny new monitor, I tested it to make sure that the picture quality was good, and then I started to install it in the cabinet. First, I took the monitor out of the plastic casing. I wanted to see if I could get it to fit onto the existing shelf that was in the cab. After some slight modifications to the cab and a lot of elbow grease (the monitor weighs a ton) the monitor was finally in the cabinet!
(As an aside, if you ever take the casing off of a TV or CRT monitor, discharge the tube. Even after sitting for a few days, you can still be electrocuted and its enough juice to kill you! Luckily, mine had a metal cage around the guts so I could safely handle it.)
I then put the smoked glass on the cab and the old control panel on to see how it would look, and here are the results:
Other Progress:
Also, I hacked up a pair of powered computer speakers and wired the four speakers that came with the cab to the circuit board and they all sound great. As I understand it, most computer speakers are 4 ohms and usually the speakers in arcade machines are 4 ohms as well. So all I had to do was remove the old speakers and solder the new ones to the board. Some people use car speakers in their cabinets, and those are usually 8 ohms, so you cannot directly connect it like I did.
Also, I have changed my mind about what front end to use. I may switch to Hyperspin later, but I would rather stay with the Space Duel themed art, so I am designing my own layout for the frontend MaLa. I am almost finished with it, as soon as I am, I will post what it looks like and make it available to anyone that wants to use/modify it.
I think thats all for now... I will be back with more progress soon!
After I got home with my shiny new monitor, I tested it to make sure that the picture quality was good, and then I started to install it in the cabinet. First, I took the monitor out of the plastic casing. I wanted to see if I could get it to fit onto the existing shelf that was in the cab. After some slight modifications to the cab and a lot of elbow grease (the monitor weighs a ton) the monitor was finally in the cabinet!
(As an aside, if you ever take the casing off of a TV or CRT monitor, discharge the tube. Even after sitting for a few days, you can still be electrocuted and its enough juice to kill you! Luckily, mine had a metal cage around the guts so I could safely handle it.)
I then put the smoked glass on the cab and the old control panel on to see how it would look, and here are the results:
Other Progress:
Also, I hacked up a pair of powered computer speakers and wired the four speakers that came with the cab to the circuit board and they all sound great. As I understand it, most computer speakers are 4 ohms and usually the speakers in arcade machines are 4 ohms as well. So all I had to do was remove the old speakers and solder the new ones to the board. Some people use car speakers in their cabinets, and those are usually 8 ohms, so you cannot directly connect it like I did.
Also, I have changed my mind about what front end to use. I may switch to Hyperspin later, but I would rather stay with the Space Duel themed art, so I am designing my own layout for the frontend MaLa. I am almost finished with it, as soon as I am, I will post what it looks like and make it available to anyone that wants to use/modify it.
I think thats all for now... I will be back with more progress soon!
Tuesday, May 13, 2008
my next project
I just stumbled across this on twitter...
NES Controller Coffee Table
That would make a great addition to the game room. That may be the next project that I tackle after I find a good condition 21" monitor that fits my cab so I can finish this beast!
NES Controller Coffee Table
That would make a great addition to the game room. That may be the next project that I tackle after I find a good condition 21" monitor that fits my cab so I can finish this beast!
Thursday, April 17, 2008
frontend fun
I have finally decided on what frontend or interface I want the machine to have. I found one that is currently being developed and looks awesome. It is called Hyperspin and here is the thread on the BYOAC forums that explain what its all about. Alternatively, you can go directly to Hyperspin's website at http://hyperspin-fe.com. I have signed up as a beta tester for the front end, and all that I am at liberty to say right now is WOW! :)
Side Art update
I just got news that Eric has completed some serious detail on the Space Duel sideart project. Check out the progress at Rotheblog.
Tuesday, April 1, 2008
Side Art project
A while ago, I was contacted by Zorg(Eric), a member on the BYOAC forums. He asked if I was interested in scanning the side art of my Space Duel Cabinet. I gladly agreed, because the side art on Space Duel is really fantastic, and is unavailable anywhere online. So I carefully tipped my cabinet on its side, and used a regular flatbed scanner to scan 8.5"x11" sections until I had the entire artwork scanned. Eric wanted the scans so he could vectorize the artwork so the artwork would be preserved and also so full-sized reproductions could be made.
I just got an update from Eric on his progress that he has made since I sent him the scans a couple of months ago. Here is what he has done so far:
Looking good, huh? Feel free to check out his website at: http://vectorzorg.free.fr/vecto/ He has vectorized the artwork from several classic arcade games. Also, this project was featured over at Rotheblog, a classic arcade gaming blog, as well.
I will post updates on the side art project as I get them. The art on one side of my cab is damaged, so I may order a reproduction after this is all completed to replace the damaged art.
I just got an update from Eric on his progress that he has made since I sent him the scans a couple of months ago. Here is what he has done so far:
Looking good, huh? Feel free to check out his website at: http://vectorzorg.free.fr/vecto/ He has vectorized the artwork from several classic arcade games. Also, this project was featured over at Rotheblog, a classic arcade gaming blog, as well.I will post updates on the side art project as I get them. The art on one side of my cab is damaged, so I may order a reproduction after this is all completed to replace the damaged art.
Marquee Finalized
Just a little update... I finished my marquee design. Now I just have to finish the control panel overlay, and I can get my graphics printed. I think that I am going to use mamemarquees.com to do my printing. I have heard that they do a fantastic job, go check them out!
Well, without further ado...
Well, without further ado...
Friday, March 21, 2008
slow moving...
Wow. Almost two months since my last post... dang, I have been slacking. I have been working on things, but don't have anything cool to show for it. Lately, I have been working on finalizing the graphics for the marquee and the control panel, finalizing a control layout, setting up the software that will run on the computer, and doing a little troubleshooting on the PC that I plan on using. I also picked up a couple new coin mechs that will accept tokens. The ones that came with the cabinet were set up for quarters, and only one of them worked properly. Next on my to-do list is to remake the metal control panel, and find a good deal on a 21" CRT monitor to put in the cabinet. After I take care of those two things, the rest of the project should fly by.
Hopefully I will be back soon with an update.
Hopefully I will be back soon with an update.
Wednesday, January 30, 2008
The Space Duel has come home...
My friend Ryan and I went to get the cab on Saturday! The cabinet gods did try to prevent me from getting the cabinet by making me find another truck to do the hauling at the last minute, but fortunately I was able to find one, and all was good. We were able to find the place easily and made it home with no problems. Luckily the guy that I was getting the cabinet from was not a frail old man, as the cabinet would have been a pain to load with just the two of us!
Of course, both of us forgot to bring a camera, so the only photos that I have are ones that I took of the cabinet after it was already in my basement. So without further ado...
This is the cab sitting in the basement where I will be working on it.
This is the control panel... its a bit chopped up, but that doesn't matter. I know someone who works at a metal shop and he is going to use the original to make a new one for me.
Here are a few detail shots of the coin door, coin mechs and plate on the bottom front
Looks like its #2491 in the production run... I wonder how many of these were made?
And finally, here is a photo of my test bench. That control panel was made with a hand saw, some spare screws I had laying around and some wood from an old computer desk... quality!
That's all for now. I will update as soon as I get some more done on the cab... gotta get some big kid stuff out of the way first...
Of course, both of us forgot to bring a camera, so the only photos that I have are ones that I took of the cabinet after it was already in my basement. So without further ado...
This is the cab sitting in the basement where I will be working on it.
This is the control panel... its a bit chopped up, but that doesn't matter. I know someone who works at a metal shop and he is going to use the original to make a new one for me.
Here are a few detail shots of the coin door, coin mechs and plate on the bottom front
Coin mechs... they accept quarters, and both of them still work!
Looks like its #2491 in the production run... I wonder how many of these were made?
And finally, here is a photo of my test bench. That control panel was made with a hand saw, some spare screws I had laying around and some wood from an old computer desk... quality!
That's all for now. I will update as soon as I get some more done on the cab... gotta get some big kid stuff out of the way first...
Subscribe to:
Posts (Atom)





